Liftable Tubular Diffuser (Aeration Cylinder with Saddle Fitting)
Aeration elements, air distribution pipes, and a lifting structure form a removable assembly intended to simplify maintenance access.
View DetailsProduct center
Wastewater treatment equipment and process components
Browse fine bubble aeration systems, MBBR biofilm carrier media, filtration components, process packing, sludge handling and screening equipment.
Product category
Aeration Systems & Diffusers
Aeration products for wastewater treatment systems.
Flat-Plate and Disc Fine Bubble Diffusers
Flat-plate and disc fine-bubble diffusers distribute air through an elastic membrane supported by a rigid body; geometry, connection, and layout must be confirmed for each form.
View Details
Swirl Aerator / Swirl Aeration Cylinder
A cylindrical gas-liquid mixing element uses internal flow guidance to mix blower air with the surrounding liquid and create an upward circulation pattern.
View Details
Swirl-Mixing Aerator
Fixed helical and divided flow passages disperse incoming air and promote local gas-liquid mixing without a powered rotor.
View Details
Aeration Hose
A flexible perforated hose releases air along its length and is secured with supports or ballast to suit the tank layout.
View Details
Corundum Ceramic Diffuser
Air passes through a porous corundum ceramic element to form bubbles; the ceramic body, seals, and supports must be matched as a complete assembly.
View Details
BAF Single-Orifice Membrane Diffuser
A compact membrane outlet supplies air below or within a biological aerated filter bed and is distributed through a supported pipe layout.
View Details
Titanium Alloy Diffuser
Titanium-alloy diffusers are project-selected metal wetted components for duties governed by liquid corrosivity, temperature, and the required aeration form; final construction follows approved drawings.
View Details
Diffused-Flow Aerator
A diffuser head and distribution hood disperse air into the surrounding liquid and promote circulation near the tank floor.
View Details
Swirl Aeration Cylinder
A cylindrical gas-liquid mixing element uses internal flow guidance to mix blower air with the surrounding liquid and create an upward swirling flow.
View Details
Retrievable Tube Diffuser System
Aeration elements, air distribution pipes, and a lifting structure form a removable assembly that can be raised out of the basin for maintenance.
View DetailsProduct category
Water Treatment Media & Packing
Biological media and treatment packing.
MBBR Biofilter Media
Plastic carriers move with the liquid under aeration or mechanical mixing, support attached biomass, and are retained by an outlet screen.
View Details
Honeycomb Inclined Tube Packing
Inclined parallel channels shorten the settling path for suspended solids and are supported in the clarifier by a corrosion-resistant structure.
View Details
Polyhedral Hollow Ball Packing
Open vanes form a spherical random packing that provides gas-liquid contact area; it is distinct from caged biological carrier balls.
View Details
Pall Ring Packing (Plastic and Metal)
Pall rings use windowed walls and inward tabs to create open gas-liquid contact passages. Plastic, metal, and other materials must be confirmed as separate configurations.
View Details
Ceramic Pall Ring Packing
Windowed ceramic ring walls and inward tabs form open gas-liquid contact passages for random tower packing. Ceramic Pall rings must be selected separately from plastic and metal versions.
View Details
Combined Biological Packing
Plastic ring frames support flexible fibre bundles, providing biofilm attachment area while retaining passages for water and air.
View Details
Three-Dimensional Elastic Packing
Polymer elastic strands radiate from a central cord to provide an open three-dimensional biofilm surface and are installed as suspended strings.
View Details
Aquatic Plant Packing / Bio-Rope Packing
Synthetic fibres in aquatic-plant or braided-rope forms are arranged on cords, curtains, or supports to provide biofilm attachment area; fibre systems must be confirmed separately.
View Details
Rosette Packing
Intersecting open rings form a rosette-shaped random packing that provides gas-liquid contact area while maintaining open flow paths.
View Details
Fiber Ball Filter Media
Compressible synthetic fibre balls form a deep filter bed that retains suspended solids and re-expands during a compatible backwash cycle.
View DetailsProduct category
Water Treatment Components & Fittings
Components and fittings for water treatment equipment.
Air Flotation Release Device
Pressurised dissolved-air recycle water is depressurised through a release device to form microbubbles matched to the flotation contact zone.
View Details
Filter Nozzles / Water Caps (Long and Short Stem)
Slotted filter nozzles retain media while collecting filtrate or distributing backwash flow; long- and short-stem forms suit different underdrain arrangements.
View Details
ABS Filter Plate
A moulded ABS template can locate nozzle sleeves during cast-in-place filter-floor construction; structural load capacity is determined with the concrete slab and support system.
View Details
ABS Pipe Fittings: Saddle Fittings, Tees, Elbows, Flanges, Straight and Threaded Connectors
ABS saddles, tees, elbows, flanges, couplings, and threaded fittings serve water-treatment and aeration piping and must match the pipe size system and interfaces.
View Details
PVC Pipe Fittings
PVC elbows, tees, couplings, reducers, and flanges connect process-water and compatible-medium piping and must follow the selected pipe standard.
View Details
Inline Pipe Mixer
Fixed mixing elements repeatedly divide and redirect the flow to disperse an injected chemical, using pressure drop as the mixing energy source.
View Details
Water Ejector / Flow Meter
A water ejector uses motive water through a nozzle to entrain a second fluid, while a flow meter is selected by medium and range for local or transmitted measurement; the two products require separate selection.
View Details
Float Balls and Spray Nozzles
Float devices and basket- or pipe-shaped spray nozzles serve different duties: floats relate to level or surface functions, while nozzles distribute or spray liquid. Confirm the exact form by sample or drawing.
View Details
Stainless Steel Spray Nozzle
Stainless-steel nozzles are selected by spray or distribution duty, orifice, and connection, with alloy grade and finish confirmed for the process medium.
View DetailsProduct category
Custom Water Treatment Equipment
Equipment categories for project-specific treatment systems.
Multi-Plate Screw Press for Sludge Dewatering
A low-speed screw moves conditioned sludge through fixed and moving rings, combining filtrate release with progressive compression to form dewatered cake.
View Details
Mechanical Screen
Driven rakes or a rotating tooth chain lift and discharge screenings captured in an inlet channel; bar spacing and channel hydraulics determine the configuration.
View Details
Sludge Scraper / Sludge Suction Machine
A scraper moves settled sludge toward a collection zone, while a suction machine removes floor sludge through suction points and piping; configuration follows tank geometry and withdrawal duty.
View Details
Sand-Water Separator
Grit settles in a receiving hopper and is lifted by an inclined shaftless screw, drains above the waterline, and is discharged while separated water returns to the process.
View Details
Dry Powder Dosing Unit
Metered dry powder is wetted, mixed, and matured into a solution that is stored and dosed to the process as required.
View Details
Air Flotation Equipment
Flotation equipment uses microbubbles to attach to fine suspended solids or oil droplets so they rise for removal; a system may include pressurisation, air dissolution, release, and separation stages.
View Details
Screw Conveyor
A screw conveyor moves screenings, sludge cake, and other suitable solids through a trough or tube, with construction selected for the material and layout.
View Details
Fiber Bundle Filter
Anchored fibre bundles in a pressure vessel form a compressible deep bed that is tightened for filtration and relaxed during cleaning to release retained solids.
View Details
Underground Integrated Wastewater Treatment Equipment
Underground integrated systems combine project-selected pretreatment, biological treatment, clarification, and any required polishing stages in a compact enclosure or structure.
View Details
Spray Tower / Water Tank / Filter Tank
Spray towers, tanks, and filter vessels are distinct custom equipment serving gas-liquid contact, liquid storage, and media filtration and must be designed separately for each project.
View DetailsSelection guide
Prepare the right information before requesting a quote.
Product dimensions, materials, interfaces, and performance are confirmed against the actual process and supply scope.
Product name, quantity, unit, and required delivery date
Process duty, average and peak flow, and operating hours
Water or sludge temperature, pH, solids, and relevant composition
Effluent, separation, oxygen, or mixing target and acceptance basis
Tank drawings, water levels, footprint, dimensions, and connections
Wetted materials, pressure, power, controls, and utilities
Scope for supports, pumps, installation, spares, drawings, and certificates
Delivery location, packing, and trade terms
Not sure where to start?
Send your process and equipment list.
We can organize the discussion around your application and confirmed project requirements.